Lilburn Pro Locksmith LLC in Lilburn, GA – What to Do, Ignition Cylinder Problems

Have you ever had car trouble before? Then, you may know what it is like to have to do without your car for a little while. If you don’t have another car to use while yours is in the shop, it can get pretty inconvenient for you, especially if you use it to get around a lot. Ignition problems can cause your car to be inoperable too. Didn’t know that? Well, that’s just one reason why you should make sure that you take care of your ignition cylinder. 
Despite how well you take of that ignition cylinder, at some point, it can go bad. In fact, they are usually designed to function well for a set number of miles. If you realize that your ignition cylinder has started to act crazy, make sure you get it checked out by a locksmith in your area. If you are in Georgia, a great place that you can turn to is Lilburn Pro Locksmith LLC in Lilburn, GA. We have an experienced team of automotive locksmiths that can assist you.  
ignition problem
Common Ignition Problems  
With every vehicle, there are so many things that can go wrong. It doesn’t matter how new or old it is. Once there is wear and tear on the moving parts, things can go wrong at just about any time. When it comes to ignition problems, there are a few things that you can look out for. Although some signs of ignition problem may be an indication that something else is going wrong, it never hurts to get the ignition checked out. That way, you can eliminate one of the possible problems. 
  • Stuck key 
If you have ever had a key get stuck in a lock, you should know how frustrating this can be. Getting your car key stuck in your ignition cylinder can be twice as frustrating and bothersome. Not only does it mean that you may be delayed in getting to your destination, it also means that even if you have an extra key nearby, you won’t be able to use it.  
Once your key gets stuck in your ignition, it means that something has gone wrong with the lock. Instead of trying your luck and waiting around to see if it will happen again, it is a good idea to get that ignition cylinder replaced. A good locksmith in your area should be able to replace it for you without charging you a fortune.  
  • Broken key 
It doesn’t matter what type of car you drive, once your key wasn’t bent or damaged and it breaks in your lock, it may be time to change the ignition cylinder. A broken key can indicate that there is some serious problem with the lock. To prevent future occurrences, make sure you get the ignition cylinder replaced as soon as possible. 
  • Car takes long to start 
This is one of the easiest ways to tell that your ignition cylinder is giving trouble. But it also a sign that your car batteries may be low. If you are absolutely sure that there is nothing wrong with your batteries, it is highly likely that your ignition cylinder is the source of this problem. Don’t be fooled into thinking that because you’re not driving a new car, it will take several tries to start your car. That’s not true. Once your car is functioning properly, you shouldn’t have to turn your key more than once to get it started. 
  • Car won’t start at all 
In more severe cases, your car may not be able to start any at all. More often than not, this tends to happen after other minor issues have escalated. This is why it is important to pay attention to signs that seem insignificant. You may not always be able to tell when your ignition cylinder will get to this point. So, try your best to avoid this.  
  • Engine shuts off while you’re driving 
Perhaps you are able to start your car and it seems to work fine. But, while driving, it shuts off for no reason. This is a major sign of ignition cylinder problems. Although, it may be indicative of some other issue with your vehicle, if you had been experiencing ignition trouble before, it may just mean that it has escalated to this level. Sometimes, you may not even be able to drive your vehicle as it shuts off right after being started. In either case, make sure you get your ignition cylinder checked out by a professional locksmith in your area. 
How to Prevent Ignition Cylinder Problems 
While you may not be able to totally prevent your ignition cylinder from going bad, there are several things that you can do to prolong its lifespan. Plus, knowing what to look out for can help you to nip the problem in the bud before it gets worse. 
Here are a few tips that can help you to care for your ignition cylinder better. 
  1. Clean the ignition cylinder as often as necessary. 
You don’t have to clean your ignition every day and it certainly won’t require a few hours of your time. But, it is important to make sure that you don’t have debris building up on the outside or inside of the lock. 
      2. Make sure you do not strain the ignition cylinder. 
Heavy keys and keyrings can damage your ignition cylinder. Try not to keep a lot of keys on the keyring that your car keys are on. The less the weight, the better it is for your ignition cylinder.
       3. Lubricate the cylinder as often as necessary.  
Once there are moving parts in any device, they ought to be lubricated. Since there are moving parts in your ignition cylinder, make sure you lubricate them as needed. It is always better to have very little friction than too much. 
If you need more information on how to care for your ignition cylinder or you are having problems with your ignition cylinder, give us a call at Lilburn Pro Locksmith LLCin Lilburn, GA. 

Comments

Post a Comment

Popular posts from this blog

What You Should Do In a Lockout Situation

Image
If you’re experiencing a problem with your door locks, you shouldn’t ignore this. Unfortunately, most people do until they are not able to gain access. There are various situations where you might find yourself locked out. Here at Lilburn Pro Locksmith in Lilburn, GA we will familiarize you with some of the various lockout situations that we are called to assist with. A lockout situation might cause you to become so frustrated that you can’t think about what you should do. Knowing what type of lockout situations occur and how they should be handled ahead of time will minimize your level of frustration. When you are experiencing a lockout situation, no doubt it is at the most unexpected time. This creates further frustration. Here are some common reasons you might find yourself locked out:  Jammed Pins – Sometimes the pins in your lock might jam. This will make it difficult for your key to turn in the lock. We suggest that you spray a silicone spray inside the lock...
Read more

The Outs and Ins of Access Control Locks

Image
Access control locks are locks that allow business owners and managers to control who has access to their building and when. Just as the name implies, access control locks give businesses full control over the entrances and exits of their commercial space. Access control locks come in a wide variety of styles and with various functions and capabilities, depending on the type of access control model you purchase.    How Access Control Works   Access control encompasses a wide range of electronic locking devices that are typically installed in businesses and commercial buildings. The most common types operate through the use of a number pad or combination device. Some access control devices, however, may use card readers, proximity readers, or other means of allowing users access. You may also have seen certain access control locks known as biometric readers. These are the most sophisticated type of access control. Rather than a physical key of some sort or combination,...
Read more

Why Commercial Properties Needs Panic Bars

Image
When it comes to building safety, owners and property managers have a big responsibility. Building codes, safety regulations, and other standards are mandatory for every business and building open to the public. These rules must be followed in order to ensure the physical safety of anyone that works in or comes into the building. One such regulation that is particularly important for commercial buildings when it comes to safety is the implementation of panic bars.    Panic bars are also referred to as crash bars and are an invaluable tool when it comes to building safety . They are placed horizontally across doors that are used for emergency exits, as well as main entrances and exits in commercial buildings. Panic bars are placed horizontally across doors and work simply by pushing a bar inwards towards the door itself. The way that the bar itself works allows for quick evacuation and minimizes the possibility that the door will become jammed. Panic bars can be used in conjun...
Read more