Safely and Effectively Remove a Key Stuck in the Ignition

You may never have experienced this problem until now but when your key is stuck in the ignition, don’t panic. When motorists panic, they usually end up doing something that they regret later. If you are a motorist, you should know that there is always the possibility of your key becoming stuck in the ignition, of no fault of your own. If you are not having your vehicle maintained regularly, you are more likely to experience these types of problems. You can avoid finding out the hard way just how frustrating something like this is by having your car routinely serviced. When you start to experience problems with your vehicle’s ignition, you may just think back to what you read about it here in this article. Hopefully when you do, you’ll understand the importance of having your vehicle serviced on a regular basis. 

stuck ignitiin key

It isn’t uncommon to experience trouble with your vehicles ignition. However, it can be very frustrating. When you start to have an issue with your ignition, it may stop you in your tracks because it doesn’t allow you to turn your key or remove your key from the ignition. This is extremely problematic for most motorists who experience this type of ignition issue. When your key is stuck in the ignition, just remember not to act to quickly. Our locksmiths at Lilburn Pro Locksmith LLC in Lilburn, GA often have to remind motorists of this, as they almost always seem to over-react to this situation. You can avoid this misfortune of completely stripping your ignition and making the matter worse than it already is. Trust us when we tell you that the last thing you want to have to deal with is a big, expensive ignition repair issue. 

Be advised that even if your car key looks ok, it doesn’t actually mean that it is. Some keys are bent and the owner doesn’t even realize it and therefore, they continue to use their key as usual. Your key may have a small imperfection. If it was cut incorrectly, you will surely have trouble with it at some point. Unfortunately, you might knot know that your key was cut incorrectly until you are unable to remove the key from your vehicles ignition. Again, even if you should find yourself in this situation, do not act by snatching the key out of the ignition. This is sure to make the situation worse than it already is. Just give our locksmiths at Lilburn Pro Locksmith LLC a call to help safely remove the key for you. 

If you are te sort who likes to do things themselves, you will surely be able to benefit from the following advice when your vehicle is stuck in the ignition. 

Here is what you can do when your key is in the ON position: 

  • Loosen the key in the ignition – Just by gently wiggling the key back and forth, you may be able to loosen the key to the point of it just sliding out. Don’t force the key out if it doesn’t easily slip out.  
  • Look at the vehicle gears – Make sure that the vehicle is in the ‘PARK’ position. If you’re not able to remove your key, it could be because your gear isn’t in the right position. Your key will lock in place until the vehicle is in the correct position. 
  • Evaluate the dashboard – Check to make sure your dashboard shows the same thing as your gear, ‘PARK’. Again if it isn’t in this position, the lock will not disengage to release your key. 

Here is what you can do when your key is in the OFF position: 

  • Check the battery – Whether you know it or not, the problem that you are experiencing could be due to an issue with your battery. When the battery is dead, it will not allow you to remove the key. It acts to protect you from auto theft. 
  • Loosen the key in the ignition – Again, simply move the key back and forth with hopes of the key easily sliding out on its own rather than your jerking it out. The use of too much force can make the problem worse. 
  • Put the key in the right position – The vehicle has to be in the ‘PARK’ position and Not in the ‘Drive’ position in order for the you to be able to turn the key inside the ignition.  

These are the solutions that we have shared with other motorists and they seem to work. However, everyone has their own level of comfort. If you are not comfortable with attempting these on your own then just contact one of our locksmiths. They will be happy to come to your wherever you are to handle the situation for you. We understand that it is easy for most people to get so upset that they just yank the key out of the ignition. That is why we are writing this article, in hopes that you will not get so upset that you make your problem worse. While any locksmith would welcome your business, we also want you to know what you can do to improve the situation.  

Relying on the right locksmith is also important. There are some locksmiths who will take advantage of your misfortune. You can’t afford to simply allow any locksmith to service your needs. You’ll need to rely on a locksmith with a proven track record of delivering quality services in a timely manner. You can always check with the Better Business Bureau to find out if a locksmith service is in good standing. If they are then they will probably be a good fit for your needs. However, you can also take it a step further by checking online reviews, as many people will be willing to write about their experiences with different service providers. Doing a little homework before you contact a locksmith will save you further headache and frustration. You’ll be sure to get the help that you need. 



source https://locksmithlilburnga.wordpress.com/2019/10/15/safely-and-effectively-remove-a-key-stuck-in-the-ignition/

Comments

Post a Comment

Popular posts from this blog

What You Should Do In a Lockout Situation

Image
If you’re experiencing a problem with your door locks, you shouldn’t ignore this. Unfortunately, most people do until they are not able to gain access. There are various situations where you might find yourself locked out. Here at Lilburn Pro Locksmith in Lilburn, GA we will familiarize you with some of the various lockout situations that we are called to assist with. A lockout situation might cause you to become so frustrated that you can’t think about what you should do. Knowing what type of lockout situations occur and how they should be handled ahead of time will minimize your level of frustration. When you are experiencing a lockout situation, no doubt it is at the most unexpected time. This creates further frustration. Here are some common reasons you might find yourself locked out:  Jammed Pins – Sometimes the pins in your lock might jam. This will make it difficult for your key to turn in the lock. We suggest that you spray a silicone spray inside the lock...
Read more

The Outs and Ins of Access Control Locks

Image
Access control locks are locks that allow business owners and managers to control who has access to their building and when. Just as the name implies, access control locks give businesses full control over the entrances and exits of their commercial space. Access control locks come in a wide variety of styles and with various functions and capabilities, depending on the type of access control model you purchase.    How Access Control Works   Access control encompasses a wide range of electronic locking devices that are typically installed in businesses and commercial buildings. The most common types operate through the use of a number pad or combination device. Some access control devices, however, may use card readers, proximity readers, or other means of allowing users access. You may also have seen certain access control locks known as biometric readers. These are the most sophisticated type of access control. Rather than a physical key of some sort or combination,...
Read more

Why Commercial Properties Needs Panic Bars

Image
When it comes to building safety, owners and property managers have a big responsibility. Building codes, safety regulations, and other standards are mandatory for every business and building open to the public. These rules must be followed in order to ensure the physical safety of anyone that works in or comes into the building. One such regulation that is particularly important for commercial buildings when it comes to safety is the implementation of panic bars.    Panic bars are also referred to as crash bars and are an invaluable tool when it comes to building safety . They are placed horizontally across doors that are used for emergency exits, as well as main entrances and exits in commercial buildings. Panic bars are placed horizontally across doors and work simply by pushing a bar inwards towards the door itself. The way that the bar itself works allows for quick evacuation and minimizes the possibility that the door will become jammed. Panic bars can be used in conjun...
Read more